manualshive.com logo in svg

ALDI WZTS 2000, Руководство пользователя

Поделиться
Скачать
ALDI WZTS 2000 Скачать руководство пользователя страница 31

Cleaning

31

www.einhell.co.uk

AFTER SALES SUPPORT

GB

IRE

0044 151 649 1500

0044 1890 946 244

GB IRE

Cleaning

 

WARNING!

Risk of injury!

Improperly handling the table saw poses a risk of serious injury.

 

− Before cleaning, switch the table saw off and pull the mains plug out of 

the socket.

 

− Wear suitable protective gloves when working on the table saw.

 

WARNING!

Burn hazard!

The saw blade may become hot during operation, you could burn yourself on it.

 

− Always let the saw blade cool off completely before cleaning.

NOTICE!

Risk of damage

Water that has penetrated the housing may cause a short circuit, improper 

cleaning could damage the table saw.

 

− Do not wash the table saw and also do not spray it off with a water jet.

 

− Make sure that no water penetrates the housing.

 

− Do not use any aggressive cleaners, sharp or metallic cleaning utensils 

such as knives, hard scrapers and the like. They could damage the 

surfaces.

 

− Clean the table saw directly after each use. 

 

− Keep the protective devices as free of dust and dirt as possible.

 

− Rub the table saw off with a clean cloth or blow it off with low-pressure 

compressed air.  

Wear protective goggles when using compressed air.

 

− Use a damp cloth and a small amount of soft soap if it is heavily soiled.

Содержание WZTS 2000










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды