ALDI WZTS 2000 Скачать руководство пользователя страница 36

Страница: 36 / 41

Noise information

www.einhell.co.uk

AFTER SALES SUPPORT

GB IRE

IRE

0044 151 649 1500

0044 1890 946 244

Noise information

WARNING!

Health hazard!

− Wear ear protection and suitable protective clothing when working with

the device.

Noise emission values

Measured in accordance with EN 61029-1. The noise at your workplace may exceed 85

dB (A); protective measures are necessary in this case (wear suitable ear protection).

• Sound pressure level: L

94.88 dB(A)

• Sound power level: L

1 07.88 dB(A)

• Uncertainty K 3 dB(A)

The aforementioned values are noise emission values and therefore, do not

necessarily represent safe values for the workplace at the same time. The correlation

between emission and immission levels cannot reliably provide for a conclusion as to

whether additional cautionary measures are necessary or not.
Factors that could affect the respective immission level present at the workplace

involve the specification of the work area, the surrounding area, the duration of

exposure, other noise sources etc.
You must also observe any divergences in national regulations with respect to the

permissible workplace levels. The aforementioned information does, however, allow

the user to better assess dangers and risks.

Ordering spare parts

The following data should be provided when ordering spare parts:

•  Device type: WZTS 2000
•  Article number (Einhell): 43.405. 72
•  Ident number: 11016
•  Spare part number of the required spare part

You can find current prices and information at www.einhell.co.uk

Содержание WZTS 2000










































Результаты поиска

Содержание WZTS 2000

Отзывы:

Бренды по названию

Популярные бренды

ALDI WZTS 2000, Руководство пользователя

Результаты поиска

Содержание WZTS 2000

Отзывы:

Бренды по названию

Популярные бренды