manualshive.com logo in svg

ALDI WZTS 2000, Руководство пользователя

Поделиться
Скачать
ALDI WZTS 2000 Скачать руководство пользователя страница 11

Safety

11

www.einhell.co.uk

AFTER SALES SUPPORT

GB

IRE

0044 151 649 1500

0044 1890 946 244

GB IRE

13.  Do not overreach.

•  Keep proper footing and balance at all times.

14. Take good care of your power tools.

•  Keep cutting tools sharp and clean so that you can work more effectively 

and safely.

•  Observe the notes for lubricating and changing tools.
•  Check the mains connection line of the power tool regularly and have it 

replaced by a qualified professional in case of damage.

•  Check the extension cords regularly and replace them if they are 

damaged.

•  Keep the handles dry, clean and free of oil and grease.

15.  Pull the plug out of the socket.

•  When not using the power tool, before performing maintenance and 

when changing tools such as saw blades, drill bits, router bits.

16. Do not leave any tool keys inserted.

•  Before you switch the tool on, make sure that keys and adjusting tools 

have been removed.

17.  Prevent accidental start-up.

•  Ensure that the switch is off when inserting the plug in the socket.

18. Use an extension cord when working outdoors.

•  When outside, only use an extension cord that is approved for such use 

and which is labelled accordingly.

19.  Remain attentive.

•  Pay attention to what you are doing. Approach work in a reasonable 

manner. Do not use any power tool if you are not able to concentrate, are 

tired or under the influence of drugs, alcohol or medication.

20. Check the power tool for any damages.

•  Before you use the power tool, the protective devices or easily damaged 

parts must be carefully checked to make sure they are functioning 

properly and as intended.

•  Check to make sure that moving parts are fully functional, that they 

are not jammed and that the parts are not damaged. All parts must be 

properly mounted and fulfil conditions to ensure proper operation of the 

power tool.

Содержание WZTS 2000










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды