manualshive.com logo in svg

ALDI WZTS 2000, Руководство пользователя

Поделиться
Скачать
ALDI WZTS 2000 Скачать руководство пользователя страница 12

Safety

12

www.einhell.co.uk

AFTER SALES SUPPORT

12

GB IRE

GB

IRE

0044 151 649 1500

0044 1890 946 244

•  Damaged protective devices and parts must be properly repaired or 

replaced by a qualified workshop before using the table saw. 

•  Damaged switches must be replaced by a customer service workshop.
•  Do not use any power tools if the switch cannot be turned on and off. 

21.  ATTENTION!

•  Using other fitted tools and accessories may pose a risk of injury.

22. Have your power tool repaired by an electrical technician.

•  This power tool complies with applicable safety regulations. Repairs may 

only be performed by an electrician who uses original replacement parts; 

otherwise, there is a risk of accident for the operator.

Supplementary safety instructions

Supplementary safety instructions for the table saw

 

WARNING!

Danger for children and persons with impaired physical, sensory or mental 

capacities (e.g. partially disabled persons, older persons with reduced 

physical and mental capacities) or lack of experience and knowledge (e.g. 

older children).

 

− The table saw must not be used by children and persons with impaired 

physical, sensory or mental capacities or lack of experience and 
knowledge.

 

− The operator must be at least 18 years of age.

 

− Keep children away from the table saw. Make sure children do not play 

with the table saw or insert any objects into the table saw.

 

− Do not allow children to play with the packaging wrapper. They may get 

caught in it when playing and suffocate.

 

WARNING!

Risk of injury!

If used improperly or in a negligent manner, the table saw can inflict serious 
injury and harm your health.

 

− Set up the table saw on a solid, stable and level surface.

 

− Safety devices on the table saw must not be removed or dismantled.

Содержание WZTS 2000










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды