manualshive.com logo in svg

ALDI WZTS 2000, Руководство пользователя

Поделиться
Скачать
ALDI WZTS 2000 Скачать руководство пользователя страница 23

Operation

23

www.einhell.co.uk

AFTER SALES SUPPORT

GB

IRE

0044 151 649 1500

0044 1890 946 244

GB IRE

Mounting the waste bag

The waste bag 

30

 is attached between the left table width extension

  5

 and the 

table length extension

  6

 and serves to collect smaller cutting rests.

 

− Hold the waste bag between the left table width extension and the table length 

extension so that the logo on the waste bag is facing the open side.

 

− Attach the loops on the waste bag to the four premounted screws on the left 

table width extension and the table length extension so that the waste bag is 

secure.

Connecting the extraction device

 

− Connect the adapter

  25

 to the extractor 

connection on the back of the table saw.

 

− Connect the suction hose to a suitable shaving 

extractor (e.g. a multi-purpose vacuum 

cleaner) and secure it e.g. with a hose clamp.  

Observe the following: A normal household 

vacuum cleaner is not a suitable extraction 

device.

25

Operation

Setting the cutting depth

Use the crank

  49

 to rotate the saw blade

  44

 out of the saw table

  1

 or lower it into 

the saw table. To set the desired cutting depth:

• 

Increase the cutting depth: 

Turn the crank counterclockwise so that the saw 

blade is drawn out of the saw table.

• 

Reduce the cutting depth:

 Turn the crank clockwise so that the saw blade is 

lowered into the table. 

Setting the cutting angle

1. Turn the locking bolt

  46

 approx. one rotation counterclockwise to loosen it.

2. Use the crank wheel

  48

 to set the desired cutting angle on the angle scale 

47

.

3. Tighten the locking bolt by turning it clockwise to fix the saw blade

  44

 with the 

desired angle.

Содержание WZTS 2000










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды