Safety
14
www.einhell.co.uk
AFTER SALES SUPPORT
14
GB IRE
GB
IRE
0044 151 649 1500
0044 1890 946 244
− If an extension cord is required, make sure its diameter is sufficient to
accommodate the power consumption of the table saw.
Minimum sectional area 1 mm
2
.
− Only use cable drums if the cable is completely rolled out.
− Check the mains connection line. Do not use any faulty or damaged mains
connection lines.
− The table saw is equipped with a safety switch to protect it against
reactivation after a voltage drop.
− Never operate the table saw in wet rooms or in the rain.
− If the mains connection line of the table saw is damaged, it must be
replaced by the manufacturer, its after sales support or a similarly
qualified person in order to prevent risks.
− Never touch the mains plug with damp hands.
− Never pull the mains plug out of the socket by the mains connection line;
instead, always do so by taking hold of the mains plug.
− Lay the mains connection line so that it does not pose a tripping hazard.
− Do not kink the mains connection line and do not lay it over sharp edges.
Supplementary safety instructions for the saw blades
WARNING!
Risk of injury!
Using damaged or unsuitable saw blades poses a risk of injury.
− Do not use any damaged or deformed saw blades.
− Do not use any saw blades made of high speed steel.
− Check the condition of the saw blades before you use the table saw.
− Only use saw blades suitable for the material you intend to cut.
− Only use the saw blades specified by the manufacturer.
The saw blades must comply with EN 847-1 if they are intended for cutting
wood or similar materials.
− When changing the saw blade, make sure that the cutting width is not less
and the thickness of the steel blade is no greater than the thickness of the
splitting wedge.
− Only use fitted tools if you are able to use them in a controlled manner.
