Agilent Technologies U1840A Medalist sj5000, Руководство по оборудованию

Страница: 60 / 192

5-4 Agilent U1840A Medalist sj5000 Hardware Manual
5
Changing the Conveyor Rail Width
Auto Width Adjust
You can manually adjust the distance between the conveyor
rails using the sj5000 software.
1
Ensure there are no boards in the sj5000.
2
Launch the sj5000 software in Engineer mode.
3
In the main toolbar click the
Tools
button.
4
Under Category, click the
Auto Width Adjust
folder.
5
You will be reminded to remove all boards from the sj5000.
Click
Yes
to continue. (You will not be able to continue if any
boards remain in the machine.)
6
In the Auto Width Adjust window ( Figure 5-3 ), click the
Jog
Out
and
Jog In
buttons to adjust the distance between the
conveyor rails.
The Auto Width Adjust Window
To access the Auto Width Adjust tools, from the Tools menu
click the
Auto Width Adjust
folder.
Figure 5-3 Auto Width Adjust window
Table 5-1 Tools for Auto Width Adjust
Field/Function Description
Min Width Displays the minimum conveyor width allowed. If you enter
a Required Width that is less than the minimum, then this
value will be used instead.
Max Width Displays the maximum conveyor width allowed. If you
enter a Required Width that is greater than the maximum,
then this value will be used instead.