Agilent Technologies U1840A Medalist sj5000, Руководство по оборудованию

Страница: 105 / 192

Camera and Lighting Controller Testing
8
Agilent U1840A Medalist sj5000 Hardware Manual 8-5
Lighting Controller Testing
To test the lighting controller (SLC-800), follow the steps below:
1
In Windows Explorer, navigate to C:\cpi\plc\terminal and
double-click terminal.exe.
1
From the Terminal window, open slc800-new.trm.
2
Click
Settings
>
Communications
.
Make sure the settings are as follows, then click
OK
:
3
Click
MAX CURR 1-4
and check that the feedback is as follows:
1MC4000
2MC4000
3MC4000
4MC4000
4
Click
CURRENT 1-4
and check that the feedback is as follows:
1SC1100
2SC1200
3SC2500
4SC2700
5
Click
LGT ON + TRIG
and check that the feedback is ST050TS0.
Baud Rate 115.2K
Data Bits 8
Stop Bits 1
Parity None
Flow Control None
Connector COM2