Agilent Technologies U1840A Medalist sj5000, Руководство по оборудованию

Страница: 27 / 192

Introduction to the Medalist sj5000
2
Agilent U1840A Medalist sj5000 Hardware Manual 2-5
Parts of the Medalist sj5000
System Overview
The Medalist sj5000 ( Figure 2-1 ) is constructed from a rigid
welded base frame which gives stability and support to the XY
gantry robot and houses the electrical controls of the machine.
• The PC is behind the front access door.
• The gantry motor amplifiers are located at the rear of the
system in the control panel. The standard sj5000 has two
amplifiers for the X and Y axes.
• Connections for two SMEMA cables and an Ethernet cable
are provided at the rear of the system. These are located on
the right side of the control panel.
• The electrical mains inlet cable is supplied through a cut-out
in the machine base-plate, which is accessible from the
control panel.
Figure 2-1 Medalist sj5000