Agilent Technologies DSO-X 4022A, Руководство пользователя

Страница: 455 / 488

MIL-STD-1553/ARINC 429 Triggering and Serial Decode
27
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide 455
Use the 0 1 X softkey to set the bit value.
Use the Set all Bits softkey to set all bit values to 0, 1, or X.
6 If you select the Label Range condition, use the Label Min and Label Max
softkeys to specify the ends of the range.
Again, label values are always displayed in octal.
You can use the Zoom mode for easier navigation of the decoded data.
ARINC 429 Serial Decode
To set up the oscilloscope to capture ARINC 429 signals, see "Setup for
ARINC 429 Signals" on page 452.
To set up ARINC 429 serial decode:
1 Press [Serial] to display the Serial Decode Menu.
2
In the submenu accessed by the
Settings
softkey, you can use the
Base
softkey to select between hexadecimal and binary display of the
decoded data.
The base setting is used for data display in both the decode line and in
the Lister.
Label values are always displayed in octal, and SSM and SDI values are
always displayed in binary.
3
Press the
Word Format
softkey and specify the word decode format:
N O T E
To display ARINC 429 serial decode, see "ARINC 429 Serial Decode" on page 455.
N O T E
For ARINC 429 triggering set up see "ARINC 429 Triggering" on page 453.