Agilent Technologies DSO-X 4022A, Руководство пользователя

Страница: 317 / 488

Save/Recall (Setups, Screens, Data)
18
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide 317
A message indicating whether the save was successful is displayed.
See Also • "To edit arbitrary waveforms" on page 291
To navigate storage locations
When saving or recalling files, the softkey in the second position of the
Save Menu or Recall Menu, along with the Entry knob, are used to
navigate to storage locations. The storage locations can be internal
oscilloscope storage locations (for setup files or mask files) or they can be
external storage locations on a connected USB storage device.
The softkey in the second position can have these labels:
• Press to go — when you can push the Entry knob to navigate to a new
folder or storage location.
• Location
— when you have navigated to the current folder location (and
are not saving files).
•
Save to
— when you can save to the selected location.
• Load from — when you can recall from the selected file.
When saving files:
• The proposed file name is shown in the Save to file = line above the
softkeys.
• To overwrite an existing file, browse to that file and select it. To create
a new file name, see
"To enter file names" on page 317.
To enter file names
To create new file names when saving files to a USB storage device:
1 In the Save Menu, press the File Name softkey.
You must have a USB storage device connected to the oscilloscope for
this softkey to be active.
2 In the File Name Menu, press the File Name softkey.
3 In the File Name keypad dialog, you can enter file names using:
• The touch screen (when the front panel [Touch] key is lit).
• The Entry knob. Turn the knob to select a key in the dialog;
then, push the Entry knob to enter it.