Agilent Technologies DSO-X 4022A, Руководство пользователя

Страница: 145 / 488

Serial Decode
7
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide 145
1 Set up trigger and decode on the serial data signals to be analyzed.
2 Press [Serial] > Lister .
3 Press Window ; then, turn the Entry knob to select the size of the Lister
window (
Half-Screen
or
Full-Screen
).
When the touchscreen is enabled, you can touch the Lister down or up
chevrons at the top right of the graticule to select the size of the Lister
window.
4
Press
Display
; then, turn the Entry knob to select the serial slot (
Serial 1
or Serial 2 ) on which the serial bus signals are being decoded. (If you
select All , the decode information for different buses is interleaved in
time.)
Before you can select a row or navigate through the Lister data,
oscilloscope acquisitions must be stopped.
5
Press the
[Single]
key (in the Run Control group on the front panel) to
stop the acquisition.