Agilent Technologies DSO-X 4022A, Руководство пользователя

Страница: 205 / 488

205
Agilent InfiniiVision 4000 X-Series Oscilloscopes
User's Guide
s 1
11
Trigger Mode/Coupling
To select the Auto or Normal trigger mode 206
To select the trigger coupling 208
To enable or disable trigger noise rejection 209
To enable or disable trigger HF Reject 209
To set the trigger holdoff 210
External Trigger Input 210
To access the Trigger Mode and Coupling Menu:
• In the Trigger section of the front panel, press the [Mode/Coupling] key.
Noisy Signals
If the signal you are probing is noisy, you can set up the oscilloscope to
reduce the noise in the trigger path and on the displayed waveform. First,
stabilize the displayed waveform by removing the noise from the trigger
path. Second, reduce the noise on the displayed waveform.
1
Connect a signal to the oscilloscope and obtain a stable display.
2
Remove the noise from the trigger path by turning on high- frequency
rejection (
"To enable or disable trigger HF Reject" on page 209),
low- frequency rejection ( "To select the trigger coupling" on page 208),
or "To enable or disable trigger noise rejection" on page 209.
3 Use "Averaging Acquisition Mode" on page 223 to reduce noise on the
displayed waveform.