Agilent Technologies DSO-X 4022A, Руководство пользователя

Страница: 289 / 488

Waveform Generator
17
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide 289
Waveform
Type Characteristics Frequency
Range Max.
Amplitude
2
(High-Z)
?1
Offset
2
(High-Z)
1
Arbitrary Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude/High-Level,
and Offset/Low-Level softkeys to set the arbitrary
waveform signal parameters.
Use the Edit Waveform softkey to define the
arbitrary waveform shape. See
"To edit arbitrary
waveforms" on page 291.
100 mHz to
12 MHz 20 mVpp to
10 Vpp ±5.00 V
Sine Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude/High-Level,
and Offset/Low-Level softkeys to set the sine
signal parameters. 100 mHz to
20 MHz 20 mVpp to
10 Vpp ±4.00 V
Square Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude/High-Level,
Offset/Low-Level, and Duty Cycle softkeys to set
the square wave signal parameters.
The duty cycle can be adjusted from 20% to 80%. 100 mHz to
10 MHz 20 mVpp to
10 Vpp ±5.00 V
Ramp Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude/High-Level,
Offset/Low-Level, and Symmetry softkeys to set
the ramp signal parameters.
Symmetry represents the amount of time per cycle
that the ramp waveform is rising and can be
adjusted from 0% to 100%. 100 mHz to
200 kHz 20 mVpp to
10 Vpp ±5.00 V
Pulse Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude/High-Level,
Offset/Low-Level, and Width/Width Fine
softkeys to set the pulse signal parameters.
The pulse width can be adjusted from 20 ns to the
period minus 20 ns. 100 mHz to
10 MHz. 20 mVpp to
10 Vpp ±5.00 V
DC Use the Offset softkey to set the DC level. n/a n/a ±10.00 V
Noise Use the Amplitude/High-Level and
Offset/Low-Level to set the noise signal
parameters. n/a 20 mVpp to
10 Vpp ±5.00 V
Sine Cardinal Use the Frequency/Frequency
Fine/Period/Period Fine, Amplitude, and Offset
softkeys to set the sinc signal parameters. 100 mHz to
1 MHz 20 mVpp to
9 Vpp ±2.50 V