Agilent Technologies DSO-X 4022A, Руководство пользователя

Страница: 41 / 488

Getting Started
1
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide 41
12. Measure
controls The measure controls consist of:
• Cursors knob — Push this knob to select cursors from a popup menu.
Then, after the popup menu closes (either by timeout or by pushing
the knob again), rotate the knob to adjust the selected cursor
position.
• [Cursors] key — Press this key to open a menu that lets you select
the cursors mode and source.
• [Meas] key — Press this key to access a set of predefined
measurements. See Chapter 14 , “Measurements,” starting on page
241.
13. File keys Press the [Save/Recall] key to save or recall a waveform or setup. See
Chapter 18 , “Save/Recall (Setups, Screens, Data),” starting on page 309.
The [Print] key opens the Print Configuration Menu so you can print the
displayed waveforms. See
Chapter 19 , “Print (Screens),” starting on page
323.
14. Tools keys The Tools keys consist of:
• [Utility] key — Press this key to access the Utility Menu, which lets
you configure the oscilloscope's I/O settings, use the file explorer, set
preferences, access the service menu, and choose other options. See
Chapter 20 , “Utility Settings,” starting on page 329.
• [Quick Action] key — Press this key to perform the selected quick
action: measure all snapshot, print, save, recall, freeze display, and
more. See
“Configuring the [Quick Action] Key" on page 347.
• [Wave Gen1], [Wave Gen2] keys — Press these keys to access
waveform generator functions. See Chapter 17 , “Waveform
Generator,” starting on page 287.
15. [Help] key Opens the Help Menu where you can display overview help topics and
select the Language. See also
“Access the Built-In Quick Help" on
page 60.