ADEMCO Vista-128B PLUS, Инструкция по установке и настройке

Страница: 15 / 138

Section 2 – Partitioning and Panel Linking
2-3
The following chart sums up how the common lobby partition will operate.
1*18
Affects Lobby
1*19
Arms Lobby
Disarms when
partition
disarms? Attempts to arm
when partition
arms? Can be armed if
other partitions
disarmed?
0 0 NO NO YES
1 0 YES NO NO
1 1 YES YES NO
0 1 ---ENTRY NOT ALLOWED---
Example
Here is an example of how the lobby would react in a typical setup.
OFFICE 1 OFFICE 2
MAIN ENTRANCE
COMMON LOBBY
V128BP-001-V0
User #1 has access to Office #1 and the Common
Lobby.
User #2 has access to Office #2 and the Common
Lobby.
Office #1 is set up to affect the Common Lobby,
but not arm it.
Office #2 is set up to affect and arm the Common
Lobby.
NOTE: In the tables below, the notations in
parentheses ( ) indicate the current status of the
other partition when the user takes action.
Sequence #1:
Office 1 Office 2 Lobby Action
User #1: Disarms (Armed) Disarms
User #2: (Disarmed) Disarms No Change
User #1: Arms (Disarmed) No change
User #2: (Armed) Arms Arms
Sequence #2:
Office 1 Office 2 Lobby Action
User #2: (Armed) Disarms Disarms
User #1: Disarms (Disarmed) (No change)
User #2: (Disarmed) Arms No Change
User #1: Arms (Armed) No Change
Notice that in sequence #1, because Office #2 was the last to arm, the lobby also armed
(Office #2 is programmed to affect and arm the lobby). In sequence #2, the lobby could not
arm when Office #2 armed, because Office #1, which affects the lobby, was still disarmed.
When Office #1 armed, the lobby still did not arm because Office #1 was not programmed to
arm the lobby. User #1 would have to arm the lobby manually. Therefore, you would want
to program a partition to affect and arm the lobby if the users of that partition are expected
to be the last to leave the building.