ADEMCO Vista-128B PLUS, Инструкция по установке и настройке

Страница: 104 / 138

VISTA-128B PLUS Installation and Setup Guide
7-4
Scheduled Download
The VISTA-128B PLUS can be programmed to
periodically and automatically call the downloader.
When this option is set up, the system will call the
downloader at a scheduled time. Once the connection is
established with the modem, the downloader controls
which functions are performed (download, arm, upload
event log, etc.).
The programmable options for the scheduled download
are located in the #93 Menu Mode section under the
main menu prompt Scheduled Check-in.
The options are as follows:
•
Check-in interval (weekly, monthly quarterly,
yearly)
•
Quarter of the year (if quarterly is selected)
•
Month of the year (if monthly, quarterly, or yearly
is selected)
•
Day of the month (if monthly, quarterly, or yearly
is selected)
•
Day of the week (if weekly is selected)
•
Time of day
Refer to the #93 Menu Mode section in the
Programming Guide for sequence of the prompts.
Direct-Wire Downloading
The VISTA-128B PLUS can be downloaded without
using a modem or telephone line by using a 4100SM
Serial Module and Compass Downloading Software.
The direct-wire downloading connection is to be
temporary, and is not part of the permanent
installation. Direct-wire downloading is meant as a
tool for the installer during the installation process.
The connections between the control and
the 4100SM are different than those shown
in the 4100SM Installation Instructions. See
Figure 7-1 for the correct connections. In
addition, in place of the green wire, referred to
in step 2 of the “IN CASE OF DIFFICULTY”
section of the 4100SM Instructions, use the
violet wire instead.
Connector J8 on the main PC board (see the Summary
of Connections diagram on the inside back cover of this
manual) is intended to be interfaced to either a local
serial printer (see Event Log printer Connections in the
Event Log Options section) or a computer. Make
connections to a computer as shown below. Note that
the violet wire connection for a computer differs
from that used when connecting a serial printer.
Remove the VA8201 Alpha Pager Module, if it
is installed, before performing the direct-wire
download. It may be reconnected once the
direct-wire download is completed.
1 2 3 4 5 6 7 8 9
NU
J8 CONNECTOR
VIOLET GRAY YELLOW RED GREEN BROWN BLUE BLACK
IN 2
GROUND
IN 3
GROUND
OUT 5 OUT 6
GROUND GROUND
PRINTER DTR
4142TR CABLE (SUPPLIED WITH 4100SM)
8
7
6
5
4
3
2
1
4100SM SERIAL MODULE
+ PWR
- (GND)
RXD
not used
not used
TXD
not used
not used
RED BLUE WHITE
To TB6 Aux. Power (+)
(25mA current draw)
To TB7 Aux. Power (-)
Figure 7-1: Direct-Wire Downloading Connections