Additel ADT761 Series Скачать руководство пользователя страница 37

Страница: 37 / 67

◆

Set the resolution of data display in MEASURE mode or in SOURCE mode.

◆

Viewing the snapshot files, the data display according to the resolution when stored (Section 3.1.12).

◆

In the Task Report, the date displays according to the resolution when the task was created (Section3.5).

◆

If there is a display error, it will display according to six digits.

2. Triple display

◆

If enabled, the home screen will show three windows when the pressure module is connected (Figure 3-2).

◆

If the pressure module is selected as MEASURE or SOURCE, then triple display will appear.

3. Backlight Auto Off (Turn Off Light)

◆

Automatically turns off the backlight after a set time.

◆

Accepted timeout period: Never, 5 minutes, 10 minutes, 30 minutes, 1 hour, 2 hours, and 4 hours.

◆

The backlight will come on by pressing any key.

◆

The backlight is disabled in the Step function and the Control mode.

4. Power Auto Off (Auto Power Down)

◆

Automatically turns off the power after a set time.

◆

Accepted timeout period: Never, 30 minutes, 1 hour and 2 hours.

◆

It is disabled in the Step function, the Control mode and the charging status.

5. Brightness

◆

Press / to increase or decrease the brightness.

◆

Accepted eleven levels.

3.4.4 Date and time

◆

The date and time are shown on the status bar according to the configuration.

◆

The date can be set from 2000-01-01 to 2099-12-31, and the range of time is from 00:00:00 to 23:59:59.

◆

The setting also takes into account the number of days in the month, and leap year.

Содержание ADT761 Series




































































Результаты поиска

Содержание ADT761 Series

Отзывы:

Похожие инструкции для ADT761 Series

Бренды по названию

Популярные бренды

Additel ADT761 Series, Руководство пользователя

Результаты поиска

Содержание ADT761 Series

Отзывы:

Похожие инструкции для ADT761 Series

Бренды по названию

Популярные бренды