Additel 762, Руководство пользователя

Страница: 129 / 139

111
6.3 Data log
1. Set up and record
Select Application in the function menu, then select the data logging function
Click to enter the setting
In this interface, you can configure the record, click You can enter the channel configuration interface and
add the channel to be recorded. The options are as follows:
Table 36 Data logging module selection
Repeat ( 3 ) operation to add multiple channels
Click the channel item that has been set, you can set it to close and switch the color,
Set the recording interval, recording time, and recording points information
Table 37 Data logging information settings
Module type Options
Pressure module Pressure modules included with the current instrument
Electrical measurement V, mV, mA range
Electrical output V, mA, power level
Subject Valid value Description
Trigger method cycle Read-only parameter, cannot be changed
logging interval 0.5 to 100 seconds interval between two recordings