Additel 762, Руководство пользователя

Страница: 64 / 139

46

Before modification of some parameters, you may need to modify corresponding TARGET_MODE (e.g. set it to
OOS, Auto, Man, and so forth). Specifically, you can follow the user manual of PA transmitter to modify related
parameters.
(2) Calibration

Click , then a function menu will pop up. Select "Calibration" in the function menu to enter the calibration
menu.

You can calibrate the PA transmitter on the calibration menu. Before performing calibration on the PA transmitter,
please refer to relevant description of adjustment (Trim) part in the user manual of PA transmitter.
3.4 Electrical output
You can click a corresponding electrical output icon in the module display/hide operation area on the top status bar, to
display/hide the electrical signal output module. When the electrical output is displayed, the corresponding icon on the
status bar will be highlighted. When the electrical output is hidden, the corresponding icon will be dim and when signals
are being output, the output arrow on the icon will flicker.
1. Changing the range
Click the range area on the left side of the measurement area to switch the output item. The calibrator supports 0~25mA,
0~16V and 16~30V output.
2. Connection: Connect the electric circuit as shown in Figure 18.