Additel 762, Руководство пользователя

Страница: 67 / 139

49
6. Manual step

Press the / key on the keyboard or on the screen, to manually step through values.

You can click the number inside to set the step value of manual step.
7. Ramp
Press the key to enter the Ramp setup interface (only 0~25mA and 0~16V is applicable). For the Ramp output
parameters, see Table 15.
Table 15 Ramp parameters
3.5 External pressure module
1. Connection: Connect the external pressure module as shown in Figure 19.
Subject Valid value Description
Range
Do not exceed the electrical output range Set the ramp output range.
Rise time 1~60 sec
Ramp rise time
Fall time 1~60 sec
Ramp fall time
0%
wait time
1~60 sec
Wait time of the slope at the lower range value.
100%
wait time 1~60 sec Wait time of the slope at the upper range value.
Repeat 0-100 Set the cycle number of slope. 0 indicates infinite repetition.