Additel 762, Руководство пользователя

Страница: 20 / 139

2
◆
Due to the high voltage inside the device during use, please do not disassemble it without permission.
Cautious
◆
Do not shake, drop or bump the calibrator while in use;
◆ If condensation has occurred, thoroughly dry out the 762 before startup;
◆
It is recommended to replace the medium (except for water medium) every 3 months. If the medium is contaminated, it
needs to be replaced in time;
◆ Do not apply more than 30V between any two electrical jacks (except for voltage measurement jacks);
◆
Do not use any adapter other than Additel power adapter designed for the ADT762. Charge the battery as soon as the
battery symbol indicates.
◆
If the calibrator is not working properly, turn it off, remove the battery and contact Additel.
◆
Do not remove the battery while it is charging or when the calibrator is in use.
◆ Before turning off the calibrator, make sure the system pressure is reduced to the atmosphere pressure.
◆
If the battery is not used for a long time, it should be charged to 50% to 80%, and it should be taken out of the device
and stored in a dry and cool environment. Charge the battery every 3 months to prevent it from being too low due to
self-discharge and cause irreversible loss of capacity or even damage;
◆
For water medium version, the medium should be drained before low temperature storage.