Additel 762, Руководство пользователя

Страница: 122 / 139

104
information interface, and input the calibration process information of the contact pressure gauge in turn:
Table 34 Task setting of contact pressure gauge
4. Task start
 For some contents, refer to Para. 5.2.1 Task start for calibration of the dial pressure gauge.
 When starting the electric contact test in the task setting, it will test the on/off value, and during the test, it will
switch to the data collection interface to collect the switch on and off values.
Subject Valid value Description
Set point list
Valid value of the set point pressure
depends on calibrated gauge.
Pressure range; up to 17 calibration
points can be set Set the calibration point for the task, and the calibrator will
automatically set the default calibration points based on the range of
the calibrated instrument and the number of the calibration points.
The value and number of points can be adjusted as necessary.
Cycle number
1, 2, 3 Select the number of calibration process cycles
Stroke Round trip and one way Select the calibration task stroke mode
Dwell time Integer of (1 ~ 600) seconds
Waiting time from a stable set point the collection of all readings
Readout error test
On / off Set whether enable the test for readout error
Tapping Enable, disable
When enabled, the value of the pressure gauge needs to be in put
twice for each calibration point, and then the calibrator will advance
to the next calibration point to continue the task
Electric contact test Open, close
Select whether to test the electric contacts
Electric contact test point list Set valid contact value Input valid value for electric contact and status