Additel 762, Руководство пользователя

Страница: 56 / 139

38
2) For the connection mode with external power supply and external resistance, see Figure 15.
3) For the connection mode with internal power supply and external resistance, see Figure 16.
4) For the connection mode with external power supply and internal resistance, see Figure 17.
Figure 14 HART internal power / resistance Figure 15 HART external power / resistance
Figure 16 HART internal power / external resistance Figure 17 HART external power / internal resistance

After the power supply configuration is selected, you will enter the search interface. Start searching HART
devices from the address "0". After searched, the connection will be made and the HART device will be displayed. If no
connection is established the calibrator will continue to search from the address "1" until "15". After the search is complete,
the calibrator will list all the HART devices found, and can support at most 15 HART devices at the same time.