Acadia AH3024FP, Руководство пользователя

Страница: 35 / 92

35
HOMEOWNER OPERATION
Fan Speed Control: The fan speed can be adjusted through 6 speeds
and off. To activate this function, press the Mode button until it displays
the fan icon. Use the up/down arrow button to turn on, off, or adjust
the fan speed. Once you set the desired fan control, the system will
remember your selected fan speed until you manually change it.
Accent Light: This function controls the accent light functions. Pressing
the up button in this mode will turn on the accent light and allow you to
control the 6 levels of intensity. Once you set the desired light level, the
system will remember your selection until you manually change it.
IPI And CPI Modes
Intermittent Pilot and Continuous (Standing) Pilot Features - First lights a pilot then uses the pilot to ignite the main burners. The
pilot can be set in the CPI (Continuous Pilot Ignition) mode to allow the pilot to remain on indefinitely by setting the remote
control to CPI mode. If the remote control is set to the IPI (Intermittent Pilot Ignition) mode, the pilot will only light and remain
ON while the main burners are operating.
IPI Mode: This mode turns the pilot off when not in use and only lights the pilot automatically when a call for heat is made by
the remote control.
CPI Mode: If set to CPI mode, the pilot will ignite and remain on at all times.
Setting To IPI Or CPI Mode
With the remote control off, press the MODE button. You will see either “CPI” or “IPI” displayed on the screen. Press the UP
arrow button to set “CPI” mode and press the down arrow button to set “IPI” mode. Once set to the desired setting, press On/
Off button to activate.
Recommended: Keep in CPI mode. While not mandatory, this will keep the chimney
heated for proper updraft during burner ignition, and it will also eliminate excessive
condensation of exhaust vapors on the door glass.
The snowflake icon will be visible on the display always when in CPI mode.
Leaving it in CPI mode will keep the body warm and eliminate cold drafts and heat loss to the cold air that is trapped inside
the firebox.
FIRST-TIME LIGHTING INSTRUCTIONS
If you do not follow these instructions exactly, a fire
or explosion may result causing property damage,
personal injury, and loss of life.
WHAT TO DO IF YOU SMELL GAS
• Do not light any appliance.
• Do not touch any light switch
• Do not use any phone in your building.
• Call your gas supplier from a neighbor’s phone.
• Follow the provider representative’s instructions.
• If you cannot reach your gas supplier, call the fire
department for assistance.
Safety Information
• This appliance is equipped with an ignition device which automatically lights the pilot. Do not attempt to light pilot by
hand.
• Before operating, smell all around the area for gas. Be sure to smell next to the floor because some gas is heavier than air
and will settle on the floor.