Acadia AH3024FP, Руководство пользователя

Страница: 33 / 92

33
HOMEOWNER OPERATION
Master Switch
Locate the four function buttons on the remote control:
1. On/Off Button: This button turns the appliance on or off.
When this button is depressed, and the system is off, the
pilot will ignite. After pilot ignition, the pilot will light the main
burners. Refer to IPI and CPI Modes in this manual for pilot
ignition.
2. Thermostat Button: This button will allow the selection of three
modes: Manual, Normal Thermostat, and Smart Thermostat.
Remote Control Functions
You will hear a beep once every time a remote-
control button is pressed, signaling that the
command has been received.
The appliance will automatically shut off after 12
hours of continuous use.
a. Manual (Off): In this mode, the appliance can be turned on, regardless of
the room temperature. The actual room temperature has no effect in this
mode. All other functions such as fan speed control, flame height control,
and accent light intensity controls are manually controllable.
b. Normal Thermostat (On): Will turn itself on and off, depending on the
temperature you set. When you set the thermostat, it will continue heating
until the room temperature increases 1°F above the set thermostat
temperature. To increase the thermostat temperature, press the up button
until the desired temperature is displayed in the thermostat temperature
window. The fan will turn on 5 minutes after startup and will turn off 12 ½
minutes after the flames turn off. The flame height can be adjusted while in
use, fan speed can be adjusted after 5 minutes of startup. The accent light
can be adjusted any time after startup.
c. Smart Thermostat (Smart): In this mode, room temperature is maintained, and flame height adjusts automatically to
provide continual, efficient heat. All other functions of the normal thermostat mode, except the flame height adjustment,
are allowed. Manual flame height adjustment is not allowed in this mode. The Smart Thermostat function adjusts the
flame height in accordance to the difference between the set point temperature and the actual room temperature.
As the room temperature gets closer to the set point temperature, the Smart Thermostat automatically modulates the
flame down.
3. Up/Down Button: This button is used to increase or decrease the thermostat temperature, flame height, fan speed, and
accent light intensity.
4. Mode Selection Button: This button is used to toggle between the various function icons: flame height, fan speed, accent
light, and rear burner (certain models).
OFF
MANUAL
MODE
NORMAL
THERMOSTAT
SMART
MODE
ON SMART
3. Within 7 seconds, press the “ON” button on the remote control. The appliance will beep to indicate that the remote control’s
command is accepted and sets to the code of that controller.
Your system is now synchronized.
Sync Switch
LCD Display
On/Off Button
Up/Down Arrow Button
Thermostat Button
Mode Button