Acadia AH3024FP, Руководство пользователя

Страница: 26 / 92

26
INSTALLATION
SETUP
Glass Frame Assembly
Remove Glass Frame Assembly
1. Locate (2) spring-loaded latches securing the glass assembly at the bottom of the firebox.
Use only authorized parts and materials when replacing defective or damaged glass.
Do not remove the glass assembly when hot.
Do not operate with the glass removed, cracked, or broken. Replacement of the glass assembly, should be done by a
licensed or qualified service person.
LOG AND LINER INSTALLATION
• If converting to LP (propane) gas, complete the conversion before installing the log set. Follow the conversion instructions
included with the kit.
• Refer to the instruction sheets provided with your log and liner set for proper installation.
Only log and liner sets certified with the appliance shall be used.
Do not place logs directly over burner port holes. Improper log placement may affect flame
appearance and cause excessive soot to build upon the logs and glass.
This appliance should not be burned without the approved logs and/or liners properly installed. Use without the
logs and/or liners properly installed could cause damage to the appliance.
Certified Log Sets
Ridgewood Timber (AH3024LGRT)
Riverside (AH3024LGR)
Certified Liner Sets
Aged Red Brick (AH3024LARB)
Black Tie (AH3024LBT)
Baker Street (AH3024LBAK)
Frisco Ledgestone (AH3024LFL)