Acadia AH3024FP, Руководство пользователя

Страница: 11 / 92

11
INSTALLATION
STEP 1
Remove the five (5) #10AX1/2 HX screws attaching the back
cover plate to the rear of the appliance.
STEP 2
Remove the four (4) #10AX1/2 HX screws attaching the intake
chamber cover plate to the intake chamber.
STEP 3
Remove the six (6) #10AX1/2 HX screws attaching the firebox
exhaust cover to the firebox.
STEP 4
Remove the five (5) #10AX1/2 HX screws attaching the cover
plate to the top of the appliance.
STEP 5
Remove the four (4) #10AX1/2 HX screws attaching the draft
hood collar to the intake chamber.
STEP 6
Remove the six (6) machine screws attaching the intake inner
draft hood to the firebox inside top.
VENTING
Rear Vent Application
There are outlets for both top and rear venting. The unused vent exit must have the cover plates in place,
and the cover plates must be removed from the exit according to the instructions below to be used.
All components removed from the top vent exit will be reinstalled for the rear vent.
When removing and refitting the plates be sure the associated gaskets are undamaged and refitted as required.
IMPORTANT