Acadia AH3024FP, Руководство пользователя

Страница: 18 / 92

18
INSTALLATION
10”
(254 mm)
14”
(356 mm)
9”
(229 mm)
½” (13mm)
NON-COMBUSTIBLE
MATERIAL ONLY
SINGLE VERTICAL
HEADER
MANTEL
47”
(1194 mm)
MANTEL AND FINISHING REQUIREMENTS
Finishing Recommendations
The surface area above the appliance may be
affected by emitted high temperatures. To help avoid
or reduce the possibility of the sheetrock to crack the
following methods are recommended:
• Ensure the non-combustible material and sheetrock
is dry and dust free.
• For taping and mudding seams, we recommend
heat resilient tape, mesh and joint compounds.
Mud must be cured as per manufacturer’s
recommendations.
• For a painted surface, use a high quality acrylic
latex primer and finish coat. Avoid flat or light-
colored paints to prevent discoloring.
2. Depending on facing material, the lower half of the mounting bracket can be adjusted forward or backward ½ in (13 mm)
as needed.
3. Attach two (2) mounting brackets to each side of the unit.
Framing Studs
Nailing Flange
Stand-Off Flange
1/2” (13mm)
Clearance
Option 1 Option 2