ABB XT7, Руководство по эксплуатации и обслуживанию

Страница: 170 / 193

ABB | SACE Tmax XT
168 | © 2020 ABB | 1SDH001821A1002 - ECN000135670 External electronic accessories | 10 - Ekip Com Hub
Information in menu The following information will be available in the About - Modules menu if Ekip Touch has detected the module
correctly:
Information Description
SN and version Identifier and SW version of the module
IP address
Address of the module, assigned to the module by a DHCP server at the time of
connection to the network in the case of configuration with a dynamic IP, or can be
set via the menu in the event of a static IP.
NOTE :
without a DHCP server, the module automatically adopts a random IP
address within the 169.254.xxx.xxx range
Network Mask
Subnet mask; identifies the method for recognizing the subnet to which the modules
belong and enables modules to be searched for within a defined set of recipients.
Gateway address
IP address of the node to which the module is connected, in the presence of several
subnets
MAC address
Address assigned by ABB, with OUI (Organizationally Unique Identifier) equal to
ac:d3:64, which uniquely identifies the manufacturer of an Ethernet device
Remote configurations
Additional parameters can be accessed via the service connector (via Ekip Connect) or via a system bus
communication:
Parameter Description Default
CRL Enable
Allows the CRL (Certificate Revocation List) to be used to ascertain
whether the server certificate is valid
Clock update
hardening
enable
Enables control of the time reference transmitted by the SNTP server
SNTP Server
Location Enables the position of the SNTP server to be set in relation to the
network in which the module is installed
SNTP Time zone Defines the time zone to be used for synchronism +00:00
SNTP Daylight
Saving Time Used to select whether daylight saving time is present (ON) or not
(OFF) in the country to which the synchronization time refers
OFF
Disable
Gratuitous ARP
Permits (Enabled ARP) the periodic generation of a Gratuituos ARP
message, used by Ekip Connect to rapidly find the modules via
Ethernet scan without knowing the IP address beforehand
ARP Enabled