ABB HVC-R 100, Руководство по установке, Страница: 94 / 131

HVC-R 100/150 E-Bus Charger Installation Guide
Document: v0.4 / Document No.: TBA | Date: 11-08-2021 Page 94 of 131
5.14.6. Connecting the PE or lighting protection wire onto the pedestal
Prerequisites:

Tools: wire cutter, wire stripper pliers, cable lugs (2x), spanner (size 13), torque wrench
(size 13).
Instructions on connecting PE or lightning protection wire to the pedestal.
Instructions on preparing the PE wires.
In case the Dual Depot Charge Box is mounted on a pedestal, it is crucial that the pedestal is
connected to the Dual Depot Charge Box’s PE or lightning protection system with a wire.
NOTICE
For safety, it is recommended to make a loop on the PE wire so it is
longer than the phase wires. This loop ensures that the PE wire is not the
first wire that is disconnected if the Dual Depot Charge Box is moved by
a collision.