manualshive.com logo in svg

ABB FSM4000 Series, Инструкция по эксплуатации

Поделиться
Скачать
ABB FSM4000 Series Скачать руководство пользователя страница 13

 

Safety

 

D184B140U02 FSM4000 

13 

 

Pos: 6.22 /Sicherheit/Allgemein/Organisatorische Maßnahmen/Pflichten des Betreibers @ 0\mod_1129728880599_3101.doc @ 3246 

 

1.8 

Operator liability  

 

 

Before the use of corrosive and abrasive measuring fluid, the operator must clarify the 
resistance of all parts that come into contact with the fluid to be measured. ABB will gladly 
support you with the selection, however, cannot accept any liability. 

The operators must strictly observe the applicable national regulations in their countries with 
regards to installation, function tests, repairs, and maintenance of electrical devices. 

 

Pos: 6.23 /Sicherheit/Allgemein/Organisatorische Maßnahmen/Qualifikation des Personals @ 0\mod_1129728800194_3101.doc @ 3247 

 

1.9 

Personnel qualification  

 

 

The installation, commissioning and maintenance of the device may only be carried out through 
trained specialist personell authorized by the plant operator. The specialist personnel must have 
read and understood the manual and comply with its instructions.  

 

Pos: 6.24 /Sicherheit/Allgemein/Organisatorische Maßnahmen/Rücksendung von Geräten @ 0\mod_1129730744499_3101.doc @ 3248 

 

1.10 Returning 

devices 

 

 

Use the original packaging or a suitably secure packaging for returning the device for repair or 
for recalibration. Include the properly filled out return form (see attachment) with the device. 

According to EC guidelines for hazardous materials, the owner of hazardous waste is 
responsible for its disposal or must observe the following regulations for its shipping: 

All delivered devices to ABB Automation Products GmbH must be free from any hazardous 
materials (acids, alkali, solvents, etc.).  

 

Pos: 6.25 /Sicherheit/Durchfluss/FSM4000/Zusatz für Rücksendung von Geräten (FSM4000) @ 13\mod_1193302925187_3101.doc @ 131843 

 

Rinse out and neutralize hazardous materials from all hollow spaces such as between meter 
tube and housing. For flowmeter sensors larger than DN 300, the inspection screw (for draining 
condensate fluid) at the lower point of the housing must be opened to dispose of hazardous 
substances and to neutralize the coil and electrode chamber. These activities must be 
confirmed in writing using the return form. 

Pos: 6.26 /=======  Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 

Содержание FSM4000 Series































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды