ABB FPBA-01 PROFIBUS DP, Руководство пользователя

Страница: 78 / 196

78 Start-up
Starting up ACS880 and ACS880-M04 drives
1. Power up the drive.
2. Enable communication between the adapter module and the
drive by setting parameter 50.01 FBA A Enable , option slot 1,
2 or 3 depending on the slot the adapter module is attached to.
3. With parameter 50.02 FBA A comm loss func , select how the
drive reacts to a fieldbus communication break.
Note : This function monitors communication both between the
fieldbus master and the adapter module and between the
adapter module and the drive.
4. With parameter 50.03 FBA A comm loss t out , define the
time between communication break detection and the selected
action.
5. Select application-specific values for the rest of the parameters
in group 50, starting from parameter 50.04 FBA A ref1 type .
Examples of appropriate values are shown in the tables below.
6. Set the FPBA-01 configuration parameters in group 51. At the
minimum, set the required node address in parameter 51.02
Node address and the communication profile in 51.05 Profile .
7. Define the process data transferred to and from the drive in
FPBA-01 configuration parameter groups 52 and 53.
Note: The adapter module sets the Status word and Control
word automatically in parameters 52.01 FBA A data in1 and
53.01 FBA A data out1 .
8. Save the valid parameter values to permanent memory by
setting parameter 96.07 Parameter save manually to Save.
9. Validate the settings made in parameter groups 51, 52 and 53
by setting parameter 51.27 FBA A par refresh to Refresh.