ABB FPBA-01 PROFIBUS DP, Руководство пользователя

Страница: 160 / 196

160 Communication protocol
The table below shows the PROFIdrive parameter request error
codes
.
Error # Meaning Used at
00h Impermissible
parameter number Access to an unavailable parameter
01h Parameter value cannot
be changed Change access to a parameter
value that cannot be changed
02h Low or high limit
exceeded Change access with a value outside
the limits
03h Invalid subindex Access to an unavailable subindex
04h No array Access with a subindex to a non-
indexed parameter
05h Incorrect data type Change access with a value that
does not match the data type of the
parameter
06h Setting not permitted
(can only be reset) Change access with a value
unequal to 0 when this is not
permitted
07h Description element
cannot be changed Change access to a description
element that cannot be changed
09h No description data
available Access to an unavailable
description (Parameter value is
available.)
0Bh No operation priority Change access rights without rights
to change parameters
0Fh No text array available Access to a text array that is not
available (Parameter value is
available.)
11h Request cannot be
executed because of
operating mode Access is temporarily not possible
for reasons that are not specified in
detail.
14h Value impermissible Change access with a value that is
within limits but is not permissible
for other long-term reasons
(parameter with defined single
values)