ABB DressPack IRB 6640, Руководство по эксплуатации продукта

Страница: 335 / 370

6.6 Toolkits, DressPack/SpotPack
General
All service (repair, maintenance and installation) instructions contain lists of tools
required to perform the specified activity. All special tools, that is all tools that are
not considered standard as defined below, are listed in their instructions
respectively.
This way, the tools required are the sum of the Standard Toolkit and any tools
listed in the instruction.
Standard toolkit
This standard toolkit contains a set of standard tools used for DressPack/SpotPack,
3HAC17290-7.
Note Tool Article number Qty
- Socket head cap, 5-17mm - 1
- Torx socket no: 20-60 - 1
For Harting connectors Phillips screwdriver, small - 1
For Harting connectors Flat screwdriver, medium - 1
For water connectors on water
and air unit Ring-open-end spanner 8-19 mm - 2
For Tension arm unit and water
connectors on DressPack Open end wrench, 27 mm. - 1
For water connectors on
DressPack Open end wrench, 36 mm - 1
Toolkit, water panel
This toolkit contains tools needed for water panel:
Note Tool Article number Qty
For water panel Socket head cap 4 mm - 1
For water panel Ring-open-end spanner, 36 mm - 2
Toolkit, cables
This toolkit contains tools needed for work with cables:
Note Tool Article number Qty
Art. no. from Harting Removal and Insertion tool for pins and
sockets 0999 000 0171 (D-
sub) 1
Art. no. from Harting Removal tool for pins and sockets 0999 000 0012
(HAN DD) 1
Art. no. from Harting Removal tool for pins and sockets 0999 000 0319
(HAN EE) 1
Art. no. from Harting Insertion tool for pins and sockets 0999 000 0059
(HAN DD and HAN
EE) 1
Stripping pliers - 1
Continues on next page
Product manual - DressPack/SpotPack IRB 6640 335
3HAC028638-001 Revision: K
© Copyright 2007-2018 ABB. All rights reserved.
6 Reference information
6.6 Toolkits, DressPack/SpotPack