ABB DressPack IRB 6640, Руководство по эксплуатации продукта

Страница: 125 / 370

Note Action
Shown in the figure Location on page 123 . Push the customer signal and power cables
as well as air hose into the upper arm tube
from the rear, and out of the hole on the side
where the
right bracket is placed on the up-
per arm.
3
Arrange the cables and hoses so no cables
or hoses are twisted.
Note
Be careful not to damage the existing motor
cables!
Tightening torque, brass couplings 1/2":
31Nm Connect cables and hoses of the upper cable
package, to the
connection plate .
4
Tightening torque, brass couplings 3/8":
17Nm
xx0700000368
Fit rubber clamp with bracket on the connec-
tion plate with its attachment screws.
Lock screws with locking liquid .
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
Note
Place cables and hose in the correct posi-
tion! See figure!
xx0700000369
Parts:
• A: Connection plate
• B: Hose
• C: Signal and power cable
• D: Rubber clamp with bracket
Screws M6x16 quality 8.8-A2F (2 pcs)
Continues on next page
Product manual - DressPack/SpotPack IRB 6640 125
3HAC028638-001 Revision: K
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation
2.2.12 Fitting the cable package IRBDP MH3 UE
Continued