ABB DressPack IRB 6640, Руководство по эксплуатации продукта

Страница: 199 / 370

Note Action
Replace any worn items as detailed in the
chapter
Repair on page 221 .
Check for mechanical wear, especially in
areas where the cable/hose package rub
against, or move close to, the robot or any
other structure. 6
Re-adjust the assembly after installation.
Especially check any cable/hose package
at the robot wrist.
Detailed in section Replacement of pro-
tective sleeves on page 290 .
If any of the protective sleeves are worn,
rotate it or replace it. 7
Secure any loose items as detailed in the
Installation on page 45 chapter.
Check the attachments of the cable/hose
package, to make sure they are properly
secured. 8
Tighten any loose cable retainers as de-
tailed in
Repair of process cable package
on page 293 .
Check all cable retainers, to make sure the
cables/hoses are securely locked in the
cable retainers. 9
Product manual - DressPack/SpotPack IRB 6640 199
3HAC028638-001 Revision: K
© Copyright 2007-2018 ABB. All rights reserved.
3 Maintenance
3.3.1 Preventive inspection of all cables, DressPack
Continued