ABB DressPack IRB 6640, Руководство по эксплуатации продукта

Страница: 176 / 370

Location of Water and air unit, type Sb (SpotPack Basic)
The Water and air unit type Sb is located as shown in the figure below. The figure
shows the water and air unit fitted on IRB 6600, but the principle is the same for
the other models.
xx0800000115
Water and air unit, type Sb A
Connection box B
Bracket, connection box C
Bracket right (Bracket left on other side. Not shown here) D
Clamp holder with plastic clamp E
PROC 1 on robot base PROC 1
PROC 2 on robot base PROC 2
PROC 3 on robot base PROC 3
PROC 4 on robot base (option) PROC 4
Tightening torque, brass couplings 1/2": 31
Nm
CAUTION
Do not tighten the brass couplings for water
and air with excessive force.
Tightening torque, brass couplings 3/8": 17
Nm
General technical data
The table below shows technical data of the water and air pressure:
Value Parameter
Max. 0.6 MPa / 87 PSI Water operating pressure
Max. 1.0 MPa / 145 PSI Air operating pressure
The table below shows technical data for water and air quality:
Value Parameter
Normal filtered industrial water quality, 80 to
100 mesh. Water quality
Continues on next page
176 Product manual - DressPack/SpotPack IRB 6640
3HAC028638-001 Revision: K
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation
2.6.1 Installation of Water and air unit
Continued