ABB DressPack IRB 6640, Руководство по эксплуатации продукта

Страница: 317 / 370

Required equipment
Note Art. no. Equipment
A number of versions are available. See Spare parts sec-
tion!
Water and Air unit
The Water and Air unit assembly con-
tains all required hardware for fitting
and connecting.
The contents are defined in section
Toolkits, DressPack/SpotPack on
page 335
.
3HAC17290-7 Standard toolkit,
DressPack/SpotPack
SpotPack 3HAC026208-001 Circuit diagram
Removal
The procedure below details how to remove the water-in circuit. It does not deal
with details specific to each version, such as article numbers, connector types etc.
For details see the
Spare parts section.
Note Action
Turn off the water supply to the Water and Air unit. 1
Remove the hose of the water supply of the work-
shop to the Water-in circuit. 2
Remove the Proc 2 hose from the Water and Air
unit. 3
Remove the Pushlok nipple. 4
Loosen the locking nut. 5
Unscrew the two attachment screws holding the
water-in circuit. 6
Remove the Water-in circuit from the mounting
plate. 7
Remove the DIN-connector from the electrical water
valve. 8
Refitting
The procedure below details how to refit the water-in circuit. It does not deal with
details specific to each version, such as article numbers, connector types etc. For
details see the
Spare parts section.
Note Action
Attach the DIN-connector to the electrical water
valve. 1
Fit the water-in circuit with its two attachment
screws on the mounting plate. 2
Tighten the locking nut. 3
Fit the Pushlok nipple. 4
Tightening torque, brass coup-
lings 1/2": 31 Nm Connect the Proc 2 hose on the Water and Air unit.
CAUTION
Do not tighten the brass couplings for water and air
with excessive force.
5
Continues on next page
Product manual - DressPack/SpotPack IRB 6640 317
3HAC028638-001 Revision: K
© Copyright 2007-2018 ABB. All rights reserved.
4 Repair
4.4.2 Replacement of Water-in circuit
Continued