ABB ACS350 Series, Руководство пользователя

Страница: 149 / 314

Actual signals and parameters
149
1502 AO1 CONTENT MIN Defines the minimum value for signal selected with parameter
1501 AO1 CONTENT SEL. -
1503 AO1 CONTENT MAX Defines the maximum value for signal selected with parameter
1501 AO1 CONTENT SEL.
-
1504 MINIMUM AO1 Defines the minimum value for the analog output signal AO. 0
1505 MAXIMUM AO1 Defines the maximum value for the analog output signal AO. 20
1506 FILTER AO1 Defines the filter time constant for analog output AO, i.e the time
within 63% of a step change is reached. 0.1
16 SYSTEM CONTROLS Run Enable, parameter lock etc.
1601 RUN ENABLE Selects a source for the external Run Enable signal. NOT SEL
1602 PARAMETER LOCK Selects the state of the parameter lock. OPEN
1603 PASS CODE Selects the pass code for the parameter lock. 0
1604 FAULT RESET SEL Selects the source for the fault reset signal. KEYPAD
1605 USER PAR SET CHG Enables the change of the User Parameter Set through a digital
input. NOT SEL
1606 LOCAL LOCK Disables entering local control mode or selects the source for the
local control mode lock signal. NOT SEL
1607 PARAM SAVE Saves the valid parameter values to the permanent memory. DONE
1608 START ENABLE 1 Selects the source for the Start Enable 1 signal. NOT SEL
1609 START ENABLE 2 Selects the source for the Start Enable 2 signal. NOT SEL
1610 DISPLAY ALARMS Activates/deactivates alarms. NO
1611 PARAMETER VIEW Selects the parameter view, i.e which parameters are shown. DEFAULT
18 FREQ IN & TRAN OUT Frequency input and transistor output signal processing.
1801 FREQ INPUT MIN Defines the minimum input value when DI5 is used as a
frequency input. 0
1802 FREQ INPUT MAX Defines the maximum input value when DI5 is used as a
frequency input.
1000
1803 FILTER FREQ IN Defines the filter time constant for frequency input.
0.1
1804 TO MODE Selects the operation mode for the transistor output TO.
DIGITAL
1805 DO SIGNAL Selects a drive status indicated through digital output DO.
FAULT(-1)
1806 DO ON DELAY Defines the operation delay for digital output DO.
0
1807 DO OFF DELAY Defines the release delay for digital output DO.
0
1808 FO CONTENT SEL Selects a drive signal to be connected to frequency output FO.
104
1809 FO CONTENT MIN Defines the minimum frequency output FO signal value.
-
1810 FO CONTENT MAX Defines the maximum frequency output FO signal value.
-
1811 MINIMUM FO Defines the minimum value for frequency output FO.
10
1812 MAXIMUM FO Defines the maximum value for frequency output FO.
1000
1813 FILTER FO Defines the filter time constant for frequency output FO.
0.1
19 TIMER & COUNTER Timer and counter for start and stop control
1901 TIMER DELAY Defines the time delay for the timer.
10
1902 TIMER START Selects the source for the timer start signal.
NOT SEL
1903 TIMER RESET Selects the source for the timer reset signal.
NOT SEL
1904 COUNTER ENABLE Selects the source for the counter enable signal.
DISABLED
1905 COUNTER LIMIT Defines the counter limit.
1000
1906 COUNTER INPUT Selects the input signal source for the counter.
PLS IN(DI5)
1907 COUNTER RESET Selects the source for the counter reset signal.
NOT SEL
1908 COUNTER RES VAL Defines the value for the counter after reset.
0
1909 COUNT DIVIDER Defines the divider for the pulse counter.
0
1910 COUNT DIRECTION Defines the source for the counter direction selection.
UP
1911 CNTR S/S COMMAND Selects the source for the drive start/stop command when
parameter 1001 EXT1 COMMANDS value is set to COUNTER
START / COUNTER STOP.
NOT SEL
Parameters – short form list
Index
Name/Selection Description Def Custom