ABB ACS320 series, Руководство пользователя

Страница: 298 / 442

298 Fieldbus control

Actual value scaling
The scaling of actual values can be protocol dependent. In general, for Actual values,
scale the feedback integer using the parameter’s resolution. (See section
Parameter
listing for parameter resolutions.) For example:
Where parameters are in percent, section Parameter listing specifies what parameter
corresponds to 100%. In such cases, to convert from percent to engineering units,
multiply by the value of the parameter that defines 100% and divide by 100%. For
example:
1. Assuming, for the sake of this example, that the Actual value uses parameter 9908 MOTOR NOM SPEED
as the 100% reference, and that 9908 = 1800 rpm.
2. Assuming, for the sake of this example, that the Actual value uses parameter
9907 MOTOR NOM FREQ as
the 100% reference, and that 9907 = 6.00 Hz.
Although Actual value scaling could differ from the above for the N2 and FLN
protocols, it currently does not. To confirm, see the following sections, as appropriate:
• N2 analog input objects in the N2 protocol technical data section.
• Scaling drive feedback values in the FLN protocol technical data section.
Scaling does not apply for the BACnet protocol.
Feedback
Integer
Parameter
Resolution
(Feedback Integer) * (Parameter Resolution) = Scaled Value
1 0.1 mA 1 * 0.1 mA = 0.1 mA
10 0.1% 10 * 0.1% = 1%
Feedback
Integer
Parameter
Resolution
Value of the
Parameter that
defines 100%
(Feedback Integer) * (Parameter Resolution)
* (Value of 100% Ref.) / 100% = Scaled Value
10 0.1% 1800 rpm
1
10 * 0.1% * 1800 RPM / 100% = 18 rpm
100 0.1% 600 Hz
2
100 * 0.1% * 600 Hz / 100% = 60 Hz