ABB ACS 800 Series, Руководство по прошивке

Страница: 89 / 340

Program features
89
• The torque proving sequence can start when the input signal RUNNING (B3 of
actual signal 03.02 ) is ”1”, in other words, when the converter is in operation. After
a successful sequence, the output signal TORQ PROV OK changes to “1”.
• If the function detects a fault during the sequence, it keeps the signal TORQ
PROV OK in value “0”, changes the signal TORQ PROVE FLT to “1” and trips the
drive.
• Torque proving reference is fixed to 30% of the motor torque (signal TORQ PROV
REF below).
• The torque proving reference is changed from 30 % to 10 % if the High-end limit
(parameter 10.12 HIGHEND PTR) is true and the drive receives a new start
signal given by the operator.
• The actual torque is read from the signal MOT TORQ (signal 01.05 ).
Settings
Diagnostics
Parameter Additional information
76.01 ... 76.02 Activates the monitoring
76.02 Fault delay time
Other
Parameters 42.01 should be active.
Actual signal Additional information
03.33 bit 2 Torque prove fault bit
Faults
TORQ PROVE FLT Torque proving not successful
MOTOR TORQUE (1.05)
Running
<TORQ PROV REF>
<TORQ PROV SEL>
Torq prov OK
Torq prov flt
Torq prov ref
&
S
R
<TORQ PROV FLT TD>
I
O
> 1 _
<TORQ PROV SEL>