3D Systems CUBE, Руководство пользователя

Страница: 16 / 121

12 3D Systems, Inc .
INITIAL SETUP OF THE CUBE
1 . Select your language . Select the checkmark to continue .
NOTE: The selected language will be indicated .
2 . Enter a name for your printer . Scroll through the characters by pressing the
arrow symbols on each side of the screen . Select the characters to spell the
name . Select the checkmark to confirm your choice.
NOTE: You can change the name of your printer at any time .
Navigate to the System 1 screen, select CUBE NAME and follow the
instructions on the touchscreen display .
NOTE: Selecting the
abc button toggles between lowercase letters,
uppercase letters and numerals .
NOTE: The printer will search for area wireless networks .
3 . Connect the printer to a wireless network . Use the up or down arrows to scroll to
your network choice . Select the desired network name . Select SKIP to bypass
this step .
NOTE: You can connect to a wireless network at any time . Navigate
to the Network screen, select WIFI and follow the prompts on the
touchscreen display .
NOTE: The printer can also connect to an ad hoc network, a
decentralized network that wirelessly connects a local computer
to the printer directly . The computer must have a wireless adapter
configured for ad hoc mode. The adapter must use the same SSID as
is found in the printer . Connecting to an ad hoc network is discussed
further in the section titled Setting Up an Ad Hoc Network .