![background image](http://html1.mh-extra.com/html/3com/secpath-u200-cs/secpath-u200-cs_installation-manual_440781086.webp)
6-21
z
Connect GigabitEthernet 0/0 on the device to the PC using a crossover Ethernet cable. Ensure the
connectivity between the device and the PC. In this example, the IP address of GigabitEthernet 0/0
is 192.168.80.10 and that of the PC is 192.168.80.200.
z
Enable FTP Server on PC and set the path where the application file is stored.
z
Set the FTP username and password.
z
The U200 series devices are not available with FTP server software. You need to purchase and
install one yourself.
z
You can upgrade the application of the U200 series device through GigabitEthernet 0/0 only.
For the subsequent steps, refer to the corresponding steps in TFTP upgrading.
Upgrading the Application with FTP at the Command Line Interface
U200 series device servers as FTP client; PC serves as FTP server
Step1
Set up the upgrade environment, refer to “Set up an FTP upgrade environment.” on page 6-20.
Step2
Use the
dir
command on the console terminal to view the files contained in the current file system, and
the available space of the storage device. For details, refer to step 2 in “Upgrading/Backing Up the
Application with TFTP at the Command Line Interface” on page 6-18.
Step3
Enable FTP server on the PC, configure the path where the application file is stored, and set the FTP
username and password. In this example, the username is guest, and the password is 123456.
Step4
Log in to the FTP server.
<H3C>ftp 192.168.80.200
Trying 192.168.80.200 ...
Press CTRL+K to abort
Connected to 192.168.80.200.
220 3Com 3CDaemon FTP Server Version 2.0
User(192.168.80.200:(none)):guest
331 User name ok, need password
Password:
230 User logged in
[ftp]
After you log into the server, you can upgrade an application file through command lines.
Table 6-9
Description on the information displayed when the FTP client logs into the FTP server
Display information
Description
ftp 192.168.80.200
Log into the FTP server, and enter FTP client view.
User(192.168.80.200:(none))
Input the username configured on the FTP server.
331 User name ok, need password
Input the password.
230 User logged in
You have logged into the FTP server successfully.
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...