![background image](http://html1.mh-extra.com/html/3com/secpath-u200-cs/secpath-u200-cs_installation-manual_440781015.webp)
1-9
Attribute
Description
Services
Connection to an ASCII terminal
Connection to the serial interface of a local PC to run the
terminal emulation program
Command line interface
3) Console
cable
The console cable is an 8-core shielded cable. The RJ-45 connector at one end of the cable is for the
console port on the UTM device, and the DB-9 female connector at the other end is for the serial port on
a configuration terminal.
Figure 1-10 illustrates the console cable.
Figure 1-10
Console cable
Table 1-9
Console cable pinouts
RJ-45
Signal direction
DB9
Signal
1
Æ
8 CTS
2
Æ
6 DSR
3
Æ
2 RXD
4
Å
1 DCD
5 — 5 GND
6
Å
3 TXD
7
Å
4 DTR
8
Å
7 RTS
For how to connect the console cable, refer to the “Connecting the Console Cable” section in Chapter 4
“Installing the U200 Series Device.”
Ethernet interfaces
1) Introduction
A UTM series device provides fixed 10/100/1000Base-T Ethernet interfaces on its front panel, the
number of which depends on the device model. Each fixed Ethernet interface (RJ-45) uses two built-in
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...