4-12
When connecting a PC to the device with the console cable, first connect the DB-9 connector to the
serial port on the PC, and then the RJ-45 connector to the console port on the device.
Connecting Ethernet Cables
Connecting an electrical Ethernet port
Step1
Connect one end of an Ethernet cable to an electrical Ethernet port on the UTM device and the other
end to the Ethernet port on the peer device. Because a 10/100/1000 Mbps fixed electrical Ethernet port
supports MDI/MDIX autosensing, you can use a straight-through cable or crossover cable to connect
the port.
Step2
Check the status of the LED of the fixed Ethernet port after power-on. For the status of the LED, see
Table 4-4.
Table 4-4
Status of the LED
LED
Color
Status
Off
No link is present.
LINK
On
A link is present.
Off
No data is being transmitted or received.
ACT
Blinking
Data is being transmitted or received.
Connecting an Ethernet Cable to the 2GE Module
You can connect a port on the 2GE module with a straight-through cable or crossover cable as follows:
Step1
Power off the device and then install the module into the corresponding interface module slot. For the
installation of a 2GE interface module, see the “Installing a Mini Card” section in Chapter 7 “Maintaining
Hardware.”
Step2
Use a straight-through or crossover network cable to connect an interface.
z
To connect the device to a PC or another UTM device, use a crossover cable. Connect one end of
the network cable to the Ethernet interface of the 2GE, module and the other end to the Ethernet
port on the PC or UTM device.
z
To connect the device to a hub or a LAN switch, use a straight-through cable. Connect one end of
the network cable to the Ethernet interface of 2GE, and the other end to the Ethernet port on the
hub or LAN switch.
Step3
Check that the connection is correct as follows:
z
Check the status LED of the interface module slot on the front panel: If the LED is on, the power-on
self test (POST) succeeds and the module is working normally; if the LED is off, POST fails and you
need to contact your sales agent for help.
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...