6-31
Step1
Enter the BootWare main menu, and select
6
to boot the system by ignoring the system configuration.
The system prompts:
Flag Set Successfully.
The system prompts that the setting succeeds.
Step2
When the BootWare main menu appears again, select
0
to reboot the system.
System is rebooting now.
System start booting...
Booting Normal Extend BootWare....
Step3
Set a new password in system view after system reboot.
<H3C> system-view
[H3C] user-interface console 0
[H3C-ui-console0] authentication-mode password
[H3C-ui-console0] set authentication password simple 123456
The above information indicates that the password authentication is adopted on the console interface
and the password is set to
123456
and stored in plain text.
z
After reboot, the system runs with the initial default configuration, but the original configuration file
is still stored in the storage medium. To restore the original configuration, you can use the
display
saved-configuration
command to display the configuration, and then copy and execute the
configuration.
z
If the password is stored in plain text, you can use the
display current-configuration
command to
view the password in the current configuration. If the password
123456
is set with the
set
authentication password cipher
command, the password is stored in cipher text.
Step4
Save the new password.
[H3C] save
z
Execute the
save
command after modifying the user password to save the new password.
z
You are recommended to save the modification to the configuration file used by default.
Super Password Loss
The super password enables you to switch between four super levels. In the case of super password
loss, you cannot perform higher level operations.
You can clear the super password by selecting
8
on the BootWare main menu.
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...