![background image](http://html1.mh-extra.com/html/3com/secpath-u200-cs/secpath-u200-cs_installation-manual_440781094.webp)
6-29
|3 2294 May/11/2008 14:47:32 N/A flash:/~/startup.cfg |
|4 2094 May/11/2008 13:47:34 N/A flash:/~/startup_bac.cfg |
|0 Exit |
=========================================================================
Enter file no:
Step2
Enter the file number, select
4
, and the system prompts:
The file you selected is flash:/~/startup_bac.cfg,Delete it? [Y/N]
Step3
Select
Y
, and the system displays the following information:
Deleting.........
Done!
Deleting a file using the command line
You can delete a file using the
delete
[
/unreserved
]
file
-
url
command in user view.
file
-
url
specifies the
file to be deleted, and
/unreserved
indicates to delete the file permanently.
# Delete file
test.txt
in the root directory.
<H3C> delete test.txt
Delete flash:/test.txt?[Y/N]:y
%Delete file flash:/test.txt...Done.
At this time, file
test.txt
is removed to the recycle bin. If you want to restore the file, you can use the
undelete
command.
# Restore file
test.txt
in the recycle bin.
<H3C> undelete test.txt
Undelete flash:/test.txt? [Y/N]:y
% Undeleted file flash:/test.txt.
For details about the
delete
and
undelete
commands, refer to the accompanying documentation.
Specifying a Configuration File for Next Startup
You can specify a configuration file for next startup in two approaches:
z
Use the
save
command in any view to save the current configurations to the specified configuration
file in interactive mode and rename the configuration file. The system automatically sets this new
configuration file as the one used at next startup.
z
Use the
startup saved-configuration
cfgfile
command in user view. Note that the startup
configuration file must be saved in the root directory of flash memory.
# Specify a configuration file for next startup.
<H3C> startup saved-configuration testcfg.cfg
Please wait .......
...Done!
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...