![background image](http://html1.mh-extra.com/html/3com/secpath-u200-cs/secpath-u200-cs_installation-manual_440781099.webp)
6-34
Now restoring bootrom, please wait...
Restore bootrom! Please wait...
Read backup basic bootrom completed!
Restore basic bootrom completed!
Read backup extend bootrom completed!
Restore extend bootrom completed!
Restore bootrom completed!
Upgrading/Managing Configuration through the Web Interface
Introduction
The U200 series devices are available with a web interface for you to upgrade and maintain the devices
with ease. At this Web interface, you can:
z
Upgrade software
z
Upgrade the signature database
z
Maintain configuration files
About software upgrade
At the web interface, you can upgrade software, specify the main/backup software, and remove
software files.
Software upgrade is performed with TFTP (see Figure 6-12). Therefore, to download a software
upgrade file from a TFTP server, you must set the IP addresses of your U200 series device (the TFTP
client) and the TFTP server correctly and ensure that they are reachable to each other.
Figure 6-12
Network diagram for TFTP configuration
On the TFTP client and the TFTP server, make configuration as shown in Table 6-15.
Table 6-15
Configuration for TFTP file transfer
Role
Configuration
TFTP server (a PC)
Enable TFTP server on the PC and configure the TFTP working
directory
TFTP client (the U200 series
device)
Assign an IP address to the interface connected to the TFTP client
and ensure that the route between the TFTP client and the TFTP
server is reachable.
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...