6-30
Use the
display startup
command to verify the configuration.
<H3C> display startup
Current startup saved-configuration file: flash:/startup.cfg
Next startup saved-configuration file: flash:/testcfg.cfg
For details about the
save
and
startup saved-configuration
cfgfile
commands, refer to the
accompanying documentation.
Dealing With Password Loss
When the BootWare password, user password or super password is lost, resort to the following
methods:
BootWare Password Loss and Modification
If you lose your BootWare password of the U200 series device, contact your sales agent.
You can modify the BootWare password in the BootWare main menu.
Select option
5
. The system displays:
please input old password:
Enter your old password at this prompt.
please input old password: ******
In case you enter a wrong password, the system displays “Wrong password, Please input password
again:” If you fail to provide the correct password after three consecutive attempts, the system will halt,
prompting “Wrong password, system halt.”
After you enter the old password correctly, the system prompts you to enter the same new password
twice.
Please input new password: ******
Please input new password again: ******
You succeed in modifying the password if the system displays:
Password Set Successfully.
User Password Loss
If you lose your password, you cannot enter the system. In this case, you can boot the system by
ignoring the system configuration. Perform the following operations:
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...